Montgomery Lite Flyers

Check Out my Videos Here:

New SX-4 Aewsome Video

Lake Powell, AP SS off Floats

Coral Pinks Sand Dunes AP: 2006

SSE Extreme Upgrade

Mini SSE Extreme

Stryker

Race Kat

Mini Race Kat

P-51

Hangin up my Slowstick

kram242-Combat

gyrocopters:

Mickeys Designed G3p0: in vertical hover

About Us
I'm basically your average fly boy. I love to work from sun up to sun down on designs and just seeing if I can make them fly. I started out with the kits from the hobby stores and a borrowed controller. I then realized this kind of hobby required money or me learning how to modify and tweek foam to fly like no others. Seeing my designs still flying, give me both self gratification and the recognition that I was looking for. One of my goals is to create a low cost source of fun to my friends, other park fliers, and the RC community. Then they can discover for themselves how much run RC flying really is, without breaking the bank!

Announcing the Latest Hit to enter the DLG World: The SX-4

The Sx-4 is a hand built Glider for the beginner, to advanced pilot. The Wingspan is 40" and is flown with ailerons and elevator. Standard equipment not supplied with kit include receiver(4 channel), 3 micro servos a micro y extension and 160 mah 4 cell 1/3 AAA battery.

For more information, look right here.

KITS
Quality Laser & CNC cut parts, designed and flown by Doug Montgomery and test pilots.

Kits contain the following:

      1. Laser cut depron
      2. Laser cut motor mount
      3. Laser cut control horns
      4. Pushrods are .047 wire
      5. Cf Spars for appropiate models
      6. Build Guide

Replacement Parts

SSE Tail Section
Main Wing/Ailerons

Accessories
Custom CDR Brushless Motors
Laser Cut Control Horns
Laser Cut Firewall Motor Mounts
Laser Cut Universal Flatplate Motor Mount
Universal Wing Mount (C-Mount)

G10 Flapping Hinge for auto gyros

Universal Wing Mount (C-Mount)

Building Supplies

Depron
Coroplast
Carbon Fiber

Frequently Asked Questions
What do I need to purchase if I buy a complete kit, if I don't have anything else?
Typically you will need:
Transmitter:   Example: GWS GWT4A II or Futaba Skysport 4
Receiver/crystal
ESC-Electronic Speed Control
     A. Brushed or Brushless 2 amp up to 35 amp
Batteries
     A. lithium Polymer(li-po), NICD, NIMH
     B. Voltage 7.4V to 11.1V
(4) Servos to control various parts of the plane
     A. Ailerons(2), Elevator, Rudder
Motor Examples: Himax, EFLITE, CDROM, GWS Brushed
Propellar sizes from 4025-1238
Battery Charger for Designated Batteries
Rubber Bands
Carbon Fiber
Packaging Tape